Elements
Our solid core clay radiator with a balanced mix of radiant and convection heat to maximise efficiency. Available in a range of horizontal & vertical sizes.
Suitable For
› All room Sizes 500w to 2500w
› Fixed wall hung
› IPX4 version for bathrooms
Control
› 7 day programmable thermostat
Radiant Heat
› Kiln fired thermal tablet
› High performance solid clay core
› High thermal mass
Convected Heat
› Deep flutes
› Curved to promote airflow
ABOUT OUR PRODUCTS
Solid State Heaters to maximise comfort and minimise cost.
Sunflow systems offer a choice of controls for energy management to suit your lifestyle.
Control is necessary to ensure that you don’t overheat the room and waste energy.
Elements come with a 7 day programmable thermostat as standard.
› 10 years autonomy with lithium ion batteries
› 81mm x 135mm x 22mm in size
› 40mm x 40mm display size
› Wall mounted or on a base
› 2 year warranty
You can also upgrade your Elements thermostat to be Wi-Fi controlled, to give you even greater control over your heating.
Sunflow systems are direct acting to reduce energy waste and maximise reliability
Thermal comfort depends on heating the room you are using to the right temperature.
Traditional Systems are prone to failure with lots of moving parts and if the power source fails your whole house is cold:
Sunflow has zero maintenance costs and is more reliable than heat pumps or traditional boilers:
- 18 % of over 4.5 million UK homes were left out in the cold in the past year after their boilers broke down. Repair bills cost £270 on average, but 5% of people faced a breakdown bill of more than £1,250. (https://www.which.co.uk)
Central heating systems typically use one power source to heat water to a very high temperature and then use pumps and valves to move it around your whole house. This wastes energy – often heating rooms you are not in. This system is also prone to failure with lots of moving parts, and if the power source fails your whole house is cold.
A Sunflow heating system consists of direct-acting heaters in each room. You heat the rooms only when you are using them, with each heater working independently so there is no single point of failure.
Sunflow systems promote a balanced mix of radiant and convected heat of maximum efficiency
Thermal comfort depends on air temperature and radiant temperature.
The traditional open fire gave out large amounts of radiant heat but did little to heat the air. If you moved away from the fireplace you felt cold.
Most central heating system focus on air temperature, this is great for ensuring that the room is warm in all corners but is very wasteful and results in large temperature differentials.
Radiant Heat
Radiant heat is transmitted by waves and is how the sun delivers its heat. We have all felt colder when the sun goes behind a cloud. That’s the radiant heat being switched off. The air temperature hasn’t changed you just no longer feel radiant heat.
A Sunflow heating system will deliver high levels of radiant heat through our kiln fired refractory clay tablets. We then hand finish these tablets with fully embedded heating elements. They heat up extremely quickly and then retain heat for long periods of time which promotes the radiant effect.
The high levels of radiant heat allow you to turn the thermostat down 1 or 2 degrees – saving you money.
“Radiant heat has a greater influence than air temperature on how we lose or gain heat in the environment.”
“It is a fact that comfortable conditions and energy efficiency can be maintained with radiant heating systems with lowered ambient temperatures.”
Vaughan Bradshaw, author of The Building Environment Active and Passive Control Systems
Convected Heat
Convected heat is transmitted by moving molecules. Convection is useful to move warmed air into difficult to reach parts of a room.
The deep flutes in our Elements radiators are designed to maximise the heat transfer from the tablets to heat and move the air quickly and silently without the cost and noise of a fan.
