Our ultra portable solution. Low centre of gravity and rugged looks make it ideal for garden offices, garages or workshops on particularly chilly days.
› Suitable for up to 20m²
› Lockable castors for safety
› Pull handle for ease of use
› Ideal for workshops, garages etc
› Kiln fired thermal tablet
› High aluminum oxide
› Fully embedded elements
› High thermal mass
› Patented natural convection system
› Tubes to promote capillary action
Solid State Heaters to maximise comfort and minimise cost.
Our Powerdown controllers reduce the energy input into the system as the room reaches temperature. This reduction in power input is truly linear all the way from 100% to 0%. It results in a maintaining a more precise temperature in the room and reduces wastage. These controllers can be specified on the Supreme, Classic +, Classic, Cube and LST heaters.
Our WIFI controllers allow remote control of the system to reduce energy. With remote access you can switch heaters off when you are out and turn heaters on ready for when you return. This is a great advantage for second homes or if you have a very mobile lifestyle. These controllers can be specified on all of our Supreme, Classic +, Classic and Low Surface Temperature Heaters.
Our manual controllers allow simple immediate control. Simple dial controls facilitate easily understandable immediate response. These controllers are ideal for occasional use heaters and are only available on portable versions of the Classic +, Classic and Cube Heaters.
Traditional Systems are prone to failure with lots of moving parts and if the power source fails your whole house is cold:
Sunflow has zero maintenance costs and is more reliable than heat pumps or traditional boilers:
Central heating systems typically use one power source to heat water to a very high temperature and then use pumps and valves to move it around your whole house, This wastes energy – often heating rooms you are not in. This system is also prone to failure with lots of moving parts. then if the power source fails your whole house is cold.
A Sunflow heating system consists of direct-acting heaters in each room. You heat the rooms only when you are using them, Each heater works independently so there is no single point of failure.
The traditional open fire gave out large amounts of radiant heat but did little to heat the air. If you moved away from the fireplace you felt cold.
Most central heating system focus on air temperature, this is great for ensuring that the room is warm in all corners but is very wasteful and results in large temperature differentials.
A Sunflow heating system will deliver high levels of radiant heat through our kiln fired refractory clay tablets. These are made to a unique specification with high levels of Al2O3, which is a great thermal conductor, and then hand finished with fully embedded heating elements. They heat up extremely quickly and then retain heat for long periods of time which promotes the radiant effect.
The high levels of radiant heat allow you to turn the thermostat down 1 or 2 degrees – saving you money.
“Radiant heat has a greater influence than air temperature on how we lose or gain heat in the environment.”
“It is a fact that comfortable conditions and energy efficiency can be maintained with radiant heating systems with lowered ambient temperatures.”
Vaughan Bradshaw, author of The Building Environment Active and Passive Control Systems
A Sunflow heating system will promote natural convection to heat the air through one of 2 methods.
Our optimised and precision engineered 25.2mm curved flutes maximise the heat transfer from the tablets to heat and move the air quickly and silently without the cost and noise of a fan. This method is used on our Classic and Classic+ heaters.
Our patented natural convection system promotes an even faster heat transfer through capillary action. The tubes are located close to the heat tablets and a vortex action assists with smooth and fast air flow. This method is used on our Supreme, Cube and Low Surface Temperature Heaters.